Plate - frame filter press two kinds of operation



  • Plate - frame filter press two kinds of operation

    There are two operating modes of the manufacturer's analytical plate and frame filter press. The plate and frame filter press is mainly used for solid-liquid separation. The material is filtered by pressure and widely used in chemical and pharmaceutical fields. For its operation mode is not a single, the following manufacturers to explain to you about the plate frame filter press in the operation of the two ways.

    1. Automatic operation: switch the switch to the "automatic" position and then turn on the main power supply. If it is necessary to print, press the green button of the plate and frame filter press and the print light will be on. At this time, if the plate and frame filter press works, it will print automatically. If it is not necessary to print, press this button again. If the print indicator is off, it will not print. The feed time is input randomly by time relay, short 1 minute, long 9999 minutes. Filter press to complete a working cycle, if not waiting or need a longer time, press "press" or "pause".

    2. Manual operation: switch the switch to the "manual" position and operate according to the panel instructions. The feeding time can be manually controlled. Manual operation, the plate - frame filter press can still print.

    Vacuum Pump
    Heat Treatment Guide,Heat Treatment Equipment
    vacuum furnace equipment


Anmelden zum Antworten
 

Es scheint als hättest du die Verbindung zu Thesius Forum verloren, bitte warte während wir versuchen sie wieder aufzubauen.